The SC40TX was developed to bring innovation to the 40-to-50-horsepower (29.8 to 37.3 kW) stump cutter class with applications in many markets including tree care contractors, arborists, landscape, municipality, golf courses and ground maintenance.
This machine has a hydraulic ground drive and cutter wheel, meaning there are no belts or chains to service. At 36 inches (91.4 cm) wide, the SC40TX will work well in small areas and fit through standard gates.
{"model":"Model|SC40TX","feature_bullet_1":"Feature 1|Compared with traditional self-propelled stump cutters, operators will be able to maneuver the machine from stump to stump faster.","spec_ver_electrical_system__30_battery":"Battery|950 CCA","spec_ver_electrical_system__180_switches":"Switches|Cutter wheel engage/disengage, trhottle up/down, ground drive speed high/ low, creep forward/reverse","spec_ver_electrical_system__70_controller":"Controller|Vermeer ACS","spec_ver_engine_option_one__290_fuel_type":"Fuel Type|Ultra-low sulfur diesel","spec_ver_engine_option_one__30_alternator":"Alternator|80A","spec_ver_engine_option_one__10_air_cleaner":"Air Cleaner|Dry type safety element and restriction indicator","spec_ver_hydraulic_system__470_system_type":"System Type|Open loop","spec_ver_hydraulic_system__210_flow_control":"Flow Control|SmartSweep","spec_ver_hydraulic_system__480_tank_capacity":"Tank capacity|19 gal","spec_ver_electrical_system__200_system_voltage":"System Voltage|12.6","spec_ver_electrical_system__210_warning_lights":"Warning Lights|On display","spec_ver_engine_option_one__140_cooling_medium":"Cooling Medium|50/50 mix","spec_ver_engine_option_one__350_make_and_model":"Make and Model|Kohler KDI1903TCR Tier 4 Final","spec_ver_electrical_system__160_shutdown_system":"Shutdown System|Hot engine coolant temperature, low engine oil pressure, high hydraulic oil temperature","spec_ver_chassis__90_control_station_description":"Control Station Description|Fixed-rear (stand on)","spec_ver_cutterwheel_system__10_chip_containment":"Chip Containment|3 cu ft","spec_ver_cutterwheel_system__110_number_of_teeth":"Number of Teeth|20","spec_ver_hydraulic_system__200_filtration_method":"Filtration Method|Pump suction strainer (90 micron) with return filter (6 micron)","spec_ver_cutterwheel_system__50_cutterwheel_guard":"Cutterwheel Guard|Standard","spec_ver_cutterwheel_system__100_number_of_pockets":"Number of Pockets|24","spec_ver_cutterwheel_system__130_tooth_description":"Tooth Description|Yellow Jacket","spec_ver_engine_option_one__280_fuel_tank_capacity":"Fuel Tank Capacity|14.5 gal","spec_ver_cutterwheel_system__120_reversible_pockets":"Reversible Pockets|Yes","spec_ver_engine_option_one__450_number_of_cylinders":"Number of Cylinders|3","spec_ver_general_dimensions_and_weights__1050_width":"Width|35.5 in","spec_ver_general_dimensions_and_weights__130_height":"Height|56.5 in","spec_ver_general_dimensions_and_weights__270_length":"Length|130 in","spec_ver_engine_option_one__390_max_fuel_consumption":"Max Fuel Consumption|2.4 gph","spec_ver_cutterwheel_system__80_cutterwheel_thickness":"Cutterwheel Thickness|.5 in","spec_ver_hydraulic_system__460_system_relief_pressure":"System relief pressure|3926 psi","spec_ver_hydraulic_system__400_pump_flow_at_maximum_rpm":"Pump Flow at Maximum RPM|24.5 gpm","spec_ver_engine_option_one__310_gross_horsepower_maximum":"Gross Horsepower (Maximum)|40 hp","spec_ver_cutterwheel_system__20_cutterwheel_cut_above_ground":"Cutterwheel Cut Above Ground|24 in","spec_ver_cutterwheel_system__30_cutterwheel_cut_below_ground":"Cutterwheel Cut Below Ground|16 in","spec_ver_cutterwheel_system__40_cutterwheel_diameter_without_teeth":"Cutterwheel Diameter without Teeth|18 in","spec_ver_cutterwheel_system__70_cutterwheel_straight_line_dimension":"Cutterwheel Straight Line Dimension|50 in","spec_ver_general_dimensions_and_weights__780_weight_engine_option_one":"Weight - Engine Option One|2950 lbs","spec_ver_hydraulic_system__350_oil_cooler":"Oil Cooler|Yes","spec_ver_other_options__110_special_paint":"Special Paint|Optional","spec_ver_other_options__40_extended_warranty":"Extended Warranty|Optional","spec_ver_operator_presence_system__10_description":"Description|Rear-platform switch, side-capacitive handle","spec_ver_other_options__70_preventive_maintenance":"Preventive Maintenance|Optional","spec_ver_cutterwheel_drive_components__50_driveshaft":"Driveshaft|Direct couple to hydraulic motor","spec_ver_operator_presence_system__20_quantity_location":"Quantity/Location|Rear-1, Side 1","spec_ver_cutterwheel_drive_components__110_lower_gearbox":"Lower Gearbox|Straight bevel","spec_ver_cutterwheel_drive_components__170_oil_type_lower_gearbox":"Oil Type - Lower Gearbox|SAE 75W90 synthetic gear oil","spec_ver_engine_option_one__130_coolant_capacity_engine_and_radiator":"Coolant Capacity (Engine and Radiator)|1.6 gal","spec_ver_cutterwheel_drive_components__150_oil_capacity_lower_gearbox":"Oil Capacity - Lower Gearbox|.9 qt","spec_ver_electrical_system__100_display":"Display|Multifunctional display (MFD)","spec_ver_track_drive_system__150_track_type":"Track Type|7\" rubber iron core","spec_ver_track_drive_system__100_track_brake_type":"Track Brake Type|International wet disc","spec_ver_track_drive_system__30_high_speed_travel":"High Speed Travel|3.4 mph","spec_ver_track_drive_system__120_track_drive_pump_type":"Track Drive Pump Type|Gear","spec_ver_track_drive_system__180_track_width_retracted":"Track Width - Retracted|35.5\"","spec_ver_track_drive_system__90_system_relief_pressure":"System Relief Pressure|3626 psi","spec_ver_track_drive_system__110_track_drive_motor_type":"Track Drive Motor Type|Geroter","spec_ver_track_drive_system__140_track_length_on_ground":"Track Length on Ground|40.5\"","spec_ver_track_drive_system__130_track_frame_description":"Track Frame Description|Skid-steer style high mount track with spring tension","spec_ver_track_drive_system__20_ground_bearing_pressure_soft_ground":"Ground Bearing Pressure - Soft Ground|5.2 psi","spec_ver_track_drive_system__190_type_of_idler":"Type of Idler|9\" front idler, 8\" rear idler, 4.5\" triple bogey idler","spec_ver_general_dimensions_and_weights__530_overall_height_transport":"Overall Height Transport|56.5 in","product_brochure_url":"Product Brochure PDF URL|https://www.vermeer.com/getmedia/9025d97d-59d3-4d6f-a8f5-c8d3c0abb4d0/sc40tx-stump-grinder-spec-sheet?ext=.pdf"}